The Circulation Rate in U-shaped Working Chamber

Authors

  • Ambachew Maru Woubou PHD Student of DSTU, Rostov on Don, 344000, Russia

Keywords:

working media (medium), working chambers, granulations, circulating rate.

Abstract

The aim of this pilot study is to examine the circulation flow rates of the working media and workpiece in different working media densities, shapes and granulations in the U-shaped working chambers with different length and width of the working chambers. This study was conducted in Don State Technical University (DSTU) in Russia. Below tabulated results show to what extents depend circulation rate on working media heights in the working chambers, working chambers length and width and working media densities.

References

A.P. Babichev and I.A. Babichev. Fundamentals of vibration technology. Rostov on Don: Publishing Center DSTU, 2008. pp 694.

A.P. Babichev, P.D. Motrenko, L.K. Gellespi and others. The use of vibration technology for operations of finishing and stripping processes. Rostov on Don: Publishing Center DSTU, 2010. pp 288.

S.E. Yemtsov. Improving the process of vibrational finishing and stripping treatment of non-rigid parts of stamped stainless steel sheet. PHD thesis. Rostov on Don, 2001. pp.186.

A.P. Babichev, Spindle vibro-finishing parts. Rostov on Don: Department of machine building, 1966. ?2.

A.P. Babichev, Vibrating parts in abrasive medium. Rostov on Don: Publishing Center DSTU, 1968.

A.P. Babichev, P.D. Motrenko, S.A. Kostenkov and others. Tool provision processing components in granular media. Rostov on Don. Publishing Center of DSTU, 2011. pp - 267.

?.?. ??????, ?.?. ?????, ??????? ?????????? ???????????? ????????? ?? ????????????? ??????? ??????, ????????, ??????????? ??????????????? ??????????????? ???????????, ??????, 2010.

?.?. ????????, ???????????? ???????????? ????????? ?????????? ???????????? ???????, ??????-??-????, ??????? ??????????????? ??????????? ???????????, ??????, 2009.

?.?. ??????, ????????? ????????????? ???????? ??????????????? ????????? ?? ???? ?????????? ??????????????? ???????? ???????????, ??????-??-????, ??????? ??????????????? ??????????? ???????????, 1999, c-139.

Note: References indicated in ? 7, 8 & 9 are written in Russian language to find on sites.

Downloads

Published

2016-05-27

How to Cite

Woubou, A. M. (2016). The Circulation Rate in U-shaped Working Chamber. International Journal of Sciences: Basic and Applied Research (IJSBAR), 27(2), 139–147. Retrieved from https://www.gssrr.org/index.php/JournalOfBasicAndApplied/article/view/5622

Issue

Vol. 27 No. 2 (2016)

Section

Articles

License

Authors who submit papers with this journal agree to the following terms.