Microstructure and Mechanical Properties of Friction Stir Welded Dissimilar Aluminum Joints of AA2024-T3 and AA7075-T6

Authors

  • Abubakr Kraedegh PhD student, Faculty of Mechanical Engineering, university of Belgrade, Aksentija Maksimovica 9a, Pancevo 26000, Serbia
  • Aleksandar Sedmak Full Professor, Faculty of Mechanical Engineering, University of Belgrade b , Kraljice Marije 16, Belgrade 11000, Serbia
  • Aleksandar Grbovic Associate Professor, Mechanical Engineering Faculty, Belgrade 11000, Serbia

Keywords:

aluminum alloys, fusion technique, brittle material, friction stir welding, dissimilar joint.

Abstract

In this work, the microstructure and mechanical properties of friction stir welded dissimilar butt joints of 2024-to-7075 aluminum alloys were evaluated. Dissimilar aluminum alloys such as 2024-T3 and 7075-T6 plates 3mm thickness were friction stir butt welded. The welding was carried out at a constant welding speed of 100 mm/min and rotation speeds of 400, 800, 1200, 1600 and 2000 min?

References

A. Steuwer, M. J. Material Science Engineering. Poland: Springer heidelberg, 2006

C. Genevois, A. D.

H. Fujii, L. C.

H. S. Park, T. K., Microstructure and mechanical prpoerties of Friction Stir Welds of 60% Cu

Krishnan, K. N. 1999. Mater. Sci. Eng. vol.327, pp. 246-251, 2002. P.L Threadgill: State of the art, TWI Report, 17, 678.

M. J. Jones, P. H.

Ma, R. S.

P. B. Srinivasan, W. D.

P. Cavaliere, R. Nobile, F. W. Panella, A. Squillace.

Park, H. S., Kimura, T., Naga, Y., Nakata, K., & Mater, M. U. 2004. Sci Eng vol.371. Artec House Publishers.

R. Zettle, S. L. 2004. Proceeding of IIW pre-assembly Meeting on FSW. Nagoya, Japan.

A.P. Reynolds, M. Posada, J. DeLoach, M. Skinner, and J.P. Halpin, Friction Stir Weld Evaluation of DH-36 and Stainless Steel Weldments, Friction Stir Welding and Processing, TMS, 2001, pp. 159

Rhodes, M. W., Bingel, W. H., Spr, R. A., & Bampton, C. C. 2006. Scripta Materialia. Pearson Publishers.

S. A. Khodir, T. S.

T. Venugopal, K. S.

W. B. Lee, Y. M.

Y. Li, L. E.

Y. S. Sato, T. W.

Downloads

Published

2016-06-14

How to Cite

Kraedegh, A., Sedmak, A., & Grbovic, A. (2016). Microstructure and Mechanical Properties of Friction Stir Welded Dissimilar Aluminum Joints of AA2024-T3 and AA7075-T6. International Journal of Sciences: Basic and Applied Research (IJSBAR), 27(3), 269–275. Retrieved from https://www.gssrr.org/index.php/JournalOfBasicAndApplied/article/view/5883

Issue

Vol. 27 No. 3 (2016)

Section

Articles

License

Authors who submit papers with this journal agree to the following terms.